index

K2 SPHERE PRODUCT CARE & WASHING GUIDE

Take care of your K2 Sphere pieces the right way and they will take care of you. Our performance fabrics are engineered for movement, sculpt, and breathability. Following these simple care steps will keep the fit, stretch, and color of your activewear looking new wash after wash.

TABLE OF CONTENTS

1. How to Find Your K2 Sphere Care Label
2. How to Read Your K2 Sphere Care Label
3. General Washing & Drying Guidelines
4. Care Guide by Product
5. Frequently Asked Questions

1. HOW TO FIND YOUR K2 SPHERE CARE LABEL

Every K2 Sphere piece includes a care label with the exact washing instructions for that garment. You can locate it at:
T-shirts and long sleeve tops: inside the back neckline or along the inner left side seam near the hem.
If the label has been trimmed off, refer to the general guidelines below based on your product type and fabric composition.

2. HOW TO READ YOUR K2 SPHERE CARE LABEL

Your care label uses internationally recognized symbols. Here is a quick reference:
Washing: a tub icon indicates machine wash temperature and cycle Bleaching: a triangle indicates if bleach is allowed Drying: a square indicates tumble dry settings or line drying Ironing: an iron icon indicates max temperature and whether steam is allowed Note: K2 Sphere pieces should not be dry cleaned
A line under any symbol means a gentler setting is required. An X over any symbol means that action is not allowed.

3. GENERAL WASHING & DRYING GUIDELINES

To preserve the compression, stretch recovery, and color of your K2 Sphere activewear, follow these rules every wash:
1. Always turn garments inside out before washing. This protects the outer surface from friction and pilling.
2. Dissolve detergent fully in cold water before adding your garments. Direct contact with concentrated detergent can cause discoloration on performance fabrics.
3. Wash in cold or warm water (max. 40°C) on a mild/delicate cycle. If hand washing, use water no warmer than 40°C. Heat breaks down spandex and polyamide elasticity over time.
4. Use a mild, pH neutral detergent. Do not bleach never use chlorine or oxygen-based bleach, optical brighteners, or fabric softeners. Softeners coat performance fibers and block moisture wicking.
5. Wash K2 Sphere pieces separately or with similar colors. Avoid washing with towels, denim, hoodies, or anything with zippers, hooks, or velcro.
6. Use a mesh laundry bag to protect the fabric and prevent snagging.
7. Select the delicate or gentle cycle. Skip high spin speeds.
8. Do not tumble dry. The heat damages elasticity and shortens the lifespan of your garments.
9. Do not wring or twist. Gently press out excess water instead.
10. Dry flat or hang in the shade in a well ventilated area. Direct sunlight can fade colors.
11. Do not dry clean. K2 Sphere pieces should never be dry cleaned.

4. CARE GUIDE BY PRODUCT

ESSENTIALS T-SHIRT Fabric: 90% Polyester / 10% Spandex
How to Wash
1. Turn inside out and place in a mesh laundry bag.
2. Fill your washing machine or basin with cold water and dissolve a small amount of mild detergent.
3. Select the delicate cycle, or hand wash by gently pressing the garment 20 to 30 times without twisting.
4. Rinse thoroughly with cold water until the water runs clear.
How to Spin
1. Use a low spin cycle or skip the spin entirely.
2. If hand washing, press out water against the side of the basin. Never wring.
How to Dry
1. Lay flat on a clean towel or mesh drying rack.
2. Reshape the neckline, shoulders, and hem before drying.
3. Dry in a shaded, well ventilated area.
4. Avoid direct sunlight and heat sources such as radiators or dryers.
Pro Tip: Wash after every wear if the garment has absorbed sweat. Lingering moisture and bacteria break down fibers faster than the wash cycle itself.
SCULPT LONG SLEEVE TOPS Fabric: 85% Polyamide / 15% Spandex
How to Wash
1. Turn inside out and place in a mesh laundry bag.
2. Wash in cold water using the delicate cycle with a mild detergent.
3. For best results, hand wash in a basin of cool water (max. 40°C), pressing gently without rubbing or twisting.
4. Rinse thoroughly with cold water.
How to Spin
1. Use a very low spin speed or skip the spin cycle.
2. If hand washed, press water out gently between your palms or against the basin.
How to Dry
1. Lay flat on a towel, reshape, and allow to air dry.
2. Do not hang on a thin hanger while wet, as the weight of water can stretch out the shoulders.
3. Keep away from direct sunlight and heat.
Pro Tip: Polyamide is sensitive to high temperatures. Keep your sculpt piece away from any heat source to preserve the compression and recovery.
ESSENTIALS LONG SLEEVE TOP Fabric: 90% Polyester / 10% Spandex
How to Wash
1. Turn inside out and place in a mesh laundry bag.
2. Fill your washing machine or basin with cold water and dissolve a small amount of mild detergent.
3. Select the delicate cycle, or hand wash by gently pressing the garment 20 to 30 times without twisting.
4. Rinse thoroughly with cold water until the water runs clear.
How to Spin
1. Use a low spin cycle or skip the spin entirely.
2. If hand washing, press out water against the side of the basin. Never wring.
How to Dry
1. Lay flat on a clean towel or mesh drying rack.
2. Reshape the neckline, shoulders, sleeves, and hem before drying.
3. Dry in a shaded, well ventilated area.
4. Avoid direct sunlight and heat sources such as radiators or dryers.
Pro Tip: Wash after every wear if the garment has absorbed sweat. Avoid stretching the cuffs while wet so the sleeves keep their shape.
NOTE ON IRONING: K2 Sphere pieces should NOT be ironed. The high heat damages the elasticity and performance finish of polyester/polyamide/spandex fabrics. To release wrinkles, hang your garment in a steamy bathroom for a few minutes.

5. FREQUENTLY ASKED QUESTIONS

Q: Can I tumble dry my K2 Sphere activewear?
A: No. Heat from the dryer breaks down the spandex and polyamide fibers, causing the garment to lose its shape, stretch, and compression.
Q: Why should I avoid fabric softener?
A: Fabric softeners leave a residue that coats performance fibers. This blocks the moisture wicking properties that keep you dry during workouts and can trap odors in the fabric.
Q: How often should I wash my K2 Sphere tops?
A: After 2 or 3 wears, or sooner if the garment has absorbed sweat or odors. Overwashing can wear down the fabric faster than normal use, so wash only when needed to extend the life of your piece.
Q: My sculpt top feels less tight after a few months. What happened?
A: The most common causes are high heat (hot water, dryers, or direct sunlight), fabric softeners, or washing with rough items like towels and denim. Following this guide will extend the life of your sculpt pieces.
Q: Can I iron my K2 Sphere pieces?
A: No. K2 Sphere pieces should not be ironed high heat damages the elasticity and performance finish of polyester/polyamide/spandex fabrics. To release wrinkles, hang your garment in a steamy bathroom.
Q: What if my care label is missing?
A: Follow the general guidelines above based on your product type. When in doubt: cold water, delicate cycle, mild detergent, air dry in shade.

TAKE CARE, WEAR LONGER

Your K2 Sphere activewear is built to move with you. A little care goes a long way in keeping the fit, feel, and performance of every piece. For any other questions about your order or products, reach out to our team at support@k2-sphere.com.